How to use the LED vs Old Bulb Savings Calculator
- Fill in Old bulb, LED, Hours per day, Rate per kWh and Number of bulbs. Sensible sample values are already there, so you will see a result immediately.
- The answer updates as you type. Nothing to submit.
- Compare a couple of scenarios by changing one number at a time. It is the quickest way to see what really matters.
What is it good for?
Estimate savings from switching to LED bulbs. The formula is the standard one, so you can double-check the answer against a bank, a textbook or a spreadsheet.
A calculator is only as good as its inputs, so it helps to try a few different values and see how much each one changes the result. People most often reach for it when estimating how long a battery will last, checking a datasheet calculation and sizing a cable for a load.
See it in action
With the sample values already filled in, this is what the calculator shows. Change any number and the answer updates straight away.
What happens when you change the inputs?
The best way to understand a calculator is to move one number at a time. Starting from the sample values, where Monthly saving comes to 536, here is how that first result responds:
| Change | Monthly saving |
|---|---|
| Hours per day = 2.5 | 268 |
| Hours per day = 10 | 1,071 |
| Number of bulbs = 5 | 268 |
| Number of bulbs = 20 | 1,071 |
Notice which input moves the answer the most. That is the one worth getting exactly right when you use real figures.
Mistakes to avoid
Watch for impossible inputs such as a negative length or a probability above 1. They produce results that look fine and mean nothing.
Check the units before you start. Mixing centimetres with metres, or degrees with radians, is behind most wrong answers.
Rounding too early spoils the final digits. Keep the full number until the last step and round only the answer.
Privacy
The numbers you type are used only to do the calculation, in your browser. Nothing is sent to us.
Frequently asked questions
Is LED vs Old Bulb Savings Calculator free to use?
Yes, completely free. There is no sign-up, no watermark and no limit on how many times you use it.
Is my data safe when I use LED vs Old Bulb Savings Calculator?
The numbers you type are used only for the calculation in your browser. Nothing is sent or stored.
How accurate is LED vs Old Bulb Savings Calculator?
It uses the standard formula, so the arithmetic is exact. The real-world answer depends on whether your inputs match your real situation, so check anything important with a professional.
Any tips for using LED vs Old Bulb Savings Calculator?
A 9 W LED gives about the same light as a 60 W incandescent.