How to use the Feet per Second to Mach Converter
- Type the value you want to convert.
- Choose the unit you have in the From box and the unit you want in the To box.
- The answer is shown in large type, followed by the conversion factor. Press Swap to reverse the direction.
- Scroll down to the table to see the same value in every other unit of this type.
What is it good for?
Convert feet per second to mach instantly with the exact conversion factor and a table of values.
The factors used are the exact, internationally defined ones where those exist, so results will match a reference table to many decimal places. People most often reach for it when reading a product spec written in unfamiliar units, working out travel distances and speeds abroad and buying property, fuel or fabric where the units differ from what you know.
See it in action
A few common values, worked out with the exact conversion factor:
| Foot per Second | Mach |
|---|---|
| 1 ft/s | 0.00089571 Ma |
| 5 ft/s | 0.00447853 Ma |
| 10 ft/s | 0.00895707 Ma |
| 50 ft/s | 0.04478533 Ma |
| 100 ft/s | 0.08957066 Ma |
The conversion factor
One foot per second equals 0.00089571 Ma. Going the other way, one mach equals 1,116.437 ft/s. Multiply by the first number to convert, and by the second to convert back. Keeping both in mind lets you check a result by eye.
| Foot per Second | Mach |
|---|---|
| 2 ft/s | 0.00179141 Ma |
| 25 ft/s | 0.02239267 Ma |
| 250 ft/s | 0.22392665 Ma |
| 1,000 ft/s | 0.8957066 Ma |
How to sanity-check the answer
The result should be smaller than the number you started with, because each foot per second is a smaller unit than the mach, so fewer of the larger unit are needed. If the direction looks wrong, you probably have the units the wrong way round.
Privacy
The conversion is done in your browser with no network requests, so it keeps working even if your connection drops after the page loads.
Frequently asked questions
Is Feet per Second to Mach Converter free to use?
Yes, completely free. There is no sign-up, no watermark and no limit on how many times you use it.
Is my data safe when I use Feet per Second to Mach Converter?
The conversion is calculated in your browser. There are no network requests while you use it.
How precise is this conversion?
It uses the exact conversion factors where they are defined by international standards, and shows up to ten significant digits.
Any tips for using Feet per Second to Mach Converter?
One foot per second equals 8.9571e-4 Ma. So 10 ft/s is 0.008957066 Ma.