Construction · 11 November 2026

How to Estimate Home Construction Cost, Paint and Tiles

A sensible way to budget a home build or renovation, with tips for quantities of paint, tiles and concrete.

Most budget overruns happen because people estimate only the headline cost and forget the rest. A short method and a few calculators keep you closer to reality.

Start with the area and a realistic rate

Multiply the built-up area by the rate per square foot in your city. Ask two or three local contractors what they charge for your level of finish, because a basic finish and a premium finish can differ by half. The construction cost calculator adds a contingency, which I would never skip. Ten percent is a sensible floor.

Paint

Paint is easy to over-buy or under-buy. Measure wall area, subtract doors and windows, and allow for two coats. The paint calculator converts that area to litres. Buy a little extra from the same batch, since colours can vary slightly between batches.

Tiles

Add 8 to 10 percent for cutting and breakage, and more if you are laying a diagonal pattern. The tile calculator gives the count of tiles for a room size.

Concrete

For slabs and footings, volume is length times width times thickness. The concrete calculator gives the cubic metres and a rough number of cement bags, though your engineer's mix design is the final word.

The costs people forget

Electrical and plumbing fixtures, compound walls, approvals, interior work, shifting costs and rent while the house is being built. Add them to the budget at the start, not after the money is spent.

Tools mentioned in this article